Article

Docking Pilot’s Actions Cited in Probable Cause of Allision


published on 26 November 2020 839 -

Text and Photos by NTSB

The National Transportation Safety Board issued Marine Accident Brief 20/37 Tuesday for its investigation of the Sept. 23, 2019, accident involving the tugboat G.M. McAllister and the NGL Energy Partners wharf on the Southern Branch of the Elizabeth River, near Chesapeake, Virginia.

No injuries or pollution were reported in connection with the accident. Damage to the wharf was estimatedat $1.47 million.

he undocking and transit to sea of the bulk carrier Ijssel Confidence was conducted with two 4,000-horsepower tugboats, the G.M. McAllister and the Nancy McAllister. After the ship left the berth, it proceeded downriver astern in a general westerly direction toward the turning basin, with the engine dead slow astern and the rudder midship. As the Ijssel Confidence approached the turning basin where the river started to bend northwest, the vessel’s astern speed continued to increase and its course over ground remained in a westerly direction. As the docking pilot attempted to slow the ship, the vessel moved towards to the south side of the river, away from Money Point, and the G.M. McAllister struck the NGL Energy Partners berth. During the NTSB’s investigation, both tugboat captains stated the Ijssel Confidence was moving too fast for the tugboats to work effectively.

The docking pilot was an experienced former tugboat captain and mate. He had docked and undocked hundreds of ships in the accident area of the river, mostly using tractor tugboats. Conventional tugboats, like those involved in this accident, are less maneuverable than tractor tugboats. In this accident, the docking pilot neglected to take into account the conventional tugboats’ reduced effectiveness and the additive effect to the ship’s speed.

The NTSB determined the probable cause of the contact of the G.M McAllister with the NGL Energy Partners berth was the docking pilot backing down the river toward the turning basin at a speed at which the assist tugboats could not be effectively used.

Join the conversation...

Login or register to write comments and join the discussion!
Riccardo di Stefano Germany
on 2 December 2020, 06:54 UTC

Hi Gajanan, please click on the link below the article to download the PDF.
0

GK
Gajanan Karanjikar India
on 2 December 2020, 05:53 UTC

do we have the full report???
0

Read more...

Article Marine Accident Brief - Collision of Dixie Vandal Tow with Moored Trinity and Tow

by Marine-Pilots.com - published on 8 April 2020

The U.S. National Transportation Safety Board (NTSB) has released a Marine Accident Brief about an accident that occurred in March 2019, involving the towing vessel Dixie Vandal, noting that the BNWAS alarm didn't prevent the fatigued pilot from falling asleep.

0

Article NTSB investigation: Higher speed contributes to contact of tow with bridge

published on 14 December 2020

NTSB issued an investigation report on the contact of tow William C with a Rock Island railroad bridge protection cell, on Des Plaines River, in January 2020. The investigation established that high speed prevented the pilot to correct the tow’s position after completing the transit through the previous bridge.

0

Article The scariest 15 minutes of my life

by Marine-Pilots.com - published on 14 August 2019

An authentic report by Marine Pilot Capt. Agha Umar Habib (Port of Sohar, Oman) about a dramatic incident on July 23, 2019.

2

Video The complex and dangerous Centre Lead Forward Tug Manoeuvre, Port Kembla, Australia

published on 4 July 2019

(Please note: Anthony F Hoy has CASA Operational Certification for UAV Aerial Photography & Aerial Survey).
The Svitzer Marloo, a Z-Tech 2800 ASD Tug, is one of the few vessels in the world to regularly use the complex and potentially dangerous Centre Lead Forward manoeuvre to assist inbound and outbound bulk carriers in the execution of a 110 degree turn on entering and leaving Port Kembla. Tug Master Phil Jones explains how a dangerous maritime exercise, if properly executed, can deliver...

0

Article Pilot Transfer Arrangements and new Regulations

by Captain Jesus Señeriz Lopez - published on 4 February 2020

As we all know there is a new regulation established since July 2012, this new regulation refers to pilot transfer arrangements. There are other yearly safety campaigns such as IMPA that include SOLAS V.23 and IMO Resolution A 1045 and Resolution A.1108(29). Unfortunately, in this annual overview there were some accidents reported that could have been avoided.

0

Article SVITZER STRENGTHENS OPERATIONS IN AFRICA WITH NEW CONTRACT WINS

by Marine-Pilots.com - published on 8 June 2020

Recently, Svitzer took an important step towards strengthening its presence in Africa by signing a five-year contract with Nacala Logistics in Mozambique for harbour towage, occasional pilot transfer and potential salvage work in the port of Nacala. At the same time, Svitzer also secured a five-year extension of its current contract with Egyptian LNG assisting the land-based Idku LNG plant with four tugs, two mooring boats and one pilot boat.

0

Article Study: "An evaluation of fatigue factors in maritime pilot work scheduling"

by Marine-Pilots.com - published on 17 September 2020

Already published for the first time in September 2020: Maritime piloting operations involve on-call work schedules that may lead to sleep loss and circadian misalignment. The study documented pilot work scheduling practices.

6

Article Rio de Janeiro Pilots have a new president

by Marine-Pilots.com - published on 6 April 2020

Everton Schmidt assumed the position with the commitment to maintain the activities during the new coronavirus pandemic.

0

Video Understanding and Preventing Tug & Barge Risks

published on 15 January 2021

Blog: https://www.merrimacins.com/understanding-and-preventing-tug-barge-risks/ Understanding and Preventing Tug & Barge Risks The maritime industry relies on tugboats and barges for a wide range of applications. Tugs are used to pilot vessels into and out of ports, while barges are used to transport bulk materials. The relationship between tugs and barges is critical, as most barges are not self-propelled and must rely on the skilled operation of a tug or tugs for propulsion. At Merrimac...

0