STABLEonboard - Secures maritime drone operations
published on 17 November 2020 (on YouTube: on 17 November 2020) - 107
Found on YouTube. Created by "STABLEonboard".
STABLEonboard drone platforms are the enabler for maritime drone operations! Neutralizing roll and pitch movements, thereby securing calibration of drone sensors, and providing safer take-off and landing in rough seas.
#maritimedrones #stableonboard #Arendal #uav
Article Port of Antwerp using drone for pollution monitoring
by Marine-Pilots.com - published on 5 November 2020
Port authorities in Antwerp, Belgium, are making use of EMSA’s Remotely Piloted Aircraft System (RPAS) to support their day-to-day monitoring of port operations and rapid response to pollution incidents in the port area. The RPAS will enable the authorities to inspect at a distance their complex port environment which extends over an area of some 120km².
Video Drone video from Elbe River, Germany. Pilottransfer.
Video Improper use of VHF leads to collision - Human errors contributing most to nav accidents today
Found on YouTube. Created by "Banjara Cinema".
Maritime Training Videos series by Dhhunki Productions.
Contact us for production of Maritime training & safety videos,Training Shoots & Films,Incident Analysis,Case Study Videos
Corporate & Ad Films,Intro-Seminar-Conference Shoots,Documentary & Short films,Music Videos
Video Construction of Panama Canal from 1908 and 1914 in color! Part-1
Found on YouTube. Created by "Rick88888888".
Spectacular (silent) film footage of the construction of the Panama Canal more than a century ago.
The film shows the construction of the Miraflores and Gatun locks in detail as well as the digging of "The Culebra Cut" including steam trains, steam shovels and steam dredgers at work and scenes of the locks an the Canal in its first days op operation in 1914.
Wikipedia: The Panama Canal (Spanish: Canal de Panamá) is an artificial 82 km (51 miles) waterway in Panama that connects the Atlantic Ocean with the Pacific Ocean. The canal cuts across the Isthmus of Panama and is a conduit for maritime trade. Canal locks are at each end to lift ships up to Gatun Lake, an artificial lake created to reduce the amount of excavation work required for the canal, 26 m (85 ft) above sea level, and then lower the ships at the other end. The original locks, "Miraflores" in the South and "Gatun locks" in the North, are 32.5 m (110 ft) wide.
France began work on the canal in 1881, but stopped because of engineering problems and a high worker mortality rate, caused by malaria and yellow fever. The United States took over the project in 1904 and opened the canal on August 15, 1914. One of the largest and most difficult engineering projects ever undertaken, the Panama Canal shortcut greatly reduced the time for ships to travel between the Atlantic and Pacific oceans, enabling them to avoid the lengthy, hazardous Cape Horn route around the southernmost tip of South America via the Drake Passage or Strait of Magellan and the even less popular route through the Arctic Archipelago and the Bering Strait.
Thse footage has been motion-stabilized, speed-corrected, contrast- and brightness enhanced, de-noised, restored, upscaled and colorized by means of state-of-the-art AI sofware.
It took over a month to restore and colorize all available footage, our largest project ever!
This restored film is without sound. The reason is the difficulty to find near one hour of suitable music.
Please help to improve this draft Timeline:
00:00 Miraflores Locks in the South
02:10 Steam shovels in "The Cut"
02:26 West Indian workers drill holes in the rock for explosives
03:44 Not every explosion goes as it should...
04:18 Workers along the railway line
05:40 Steam shovels at work
10:10 Steam trains remove the rocks
11:42 Another blast
12:50 Views from a high point of "The Cut"
14:10 The railway tracks
15:07 Freight trains pass a check point
15:50 Special trains push earth and rocks aside
16:47 Close up view of a special train in action
18:21 West Indian workers shift the railway tracks
19:15 Workers climb up the mountain
20:22 Fresh workers arrive by steam train
21:38 Another day ahead for the workers and the steam shovels
24:22 Shifting a huge drum
24:45 More steam shovels at work
25:16 Steam trains with special equipment
25:58 Workers removing rails
26:30 Gatun locks in the North still under construction
26:52 Flooded rain forest forming Gatun Lake
27:19 The huge lock doors have been installed
27:28 Testing floading the locks
28:48 A lock filling up
29:10 Small ships enter the lock
30:05 A train ride along the canal
30:38 Preparing to blow up the last dam
31:07 Spectators gather for the blasting of the last dam
31:58 Opening a huge valve
32:42 Blasting of the last dam
33:18 Water flows into the Canal
33:27 Dredgers enter the Canal
33:44 More blasting along the Canal
34:20 Gatun locks open
35:32 Numerous ships enter the locks
37:10 The next lock chamber opens
38:46 Small boat with dignatories on the Canal
40:33 Views of the Canal and Gatun Lake
41:05 Dredgers at work to deepen the Canal
41:36 More lock views
43:03 Busy scenes at the locks
43:52 Spectators on the opening lock doors
46:01 A pilot rowing boat on its way to receive the ropes of a ship
46:42 Inner lock chamber scenes
47:45 Lock doors opening
48:49 Ship leaving the locks
49:13 More steam dredgers at work
50:02 Close up view of an active steam dredger
50:36 Rubble is released through the bottom of a barge into the lake
51:18 Flushing rubble away with a watercanon
52:40 Dredgers seen from a high viewpoint
53:52 Final views of the Canal
In view of the amount of available enhanced footage, Part-2 will follow shortly!
Video 2013: 3D "Jolly Nero" accident simulation in Genoa
Video KM Cakra Kembar Satu | Sandar | Pelabuhan tanjung emas
Found on YouTube. Created by
Teman2 berikut video referensi proses sandar di pelabuhan tanjung emas semarang, setiap pelaut/pandu punya trik tersendiri saat melakukan olah gerak kapal, jadi teman2 bisa menjadikan video ini referensi untuk olah gerak kapal, kritik dan saran2 yang membangun saya tunggu di komentar ya teman2...
Article Port of Townsville to expand pilot boat fleet
by Marine-Pilots.com - published on 24 January 2020
The Port of Townsville, northern Australia’s largest multi-cargo port, is expanding its fleet of pilot boats to four.
The Port has awarded Hart Marine a $3 million contract to build a 17.3m ORC vessel that is due for delivery later in 2020. The new high-tech vessel will be slightly longer but have the same design features as the PV Osprey which was delivered by Hart Marine in late 2017.