Baltic Workboats' PILOT 15 WP has won a Small Pilot Boat Award for 2019

Since 1978 Lyman-Morse has built more than 110 vessels, ranging from aluminum workboats to high-end composite racing yachts and luxury power yachts. “Their experience with so many different building materials opens up a world of new possibilities for our vessels,” says Baltic Workboats’ CEO Margus Vanaselja.

On November 17th 2020 Port Everglades Pilot Mark Ruppert brought the ship Zhen Hua 25 into Port Everglades. The ship was loaded with 3 huge gantry cranes, a crucial part of the port expansion project.
Found on YouTube. Filmed and produced by Captain Carl Mahler
Editor's note: Great video but where is the life jacket? 1:36

Baltic Workboat Pilot Shop, American Workboats Shipyard

We’re doing another day of testing with the self-propelled scale model of T-2000. Obviously the conditions here do comprehensively exceed the designs operational envelope, as in scale proportion to the model, the waves must be I guess around 10-20 metres in size. However it’s interesting to understand the designs ultimate limits. The model is built to a scale of fourteen to one, and this equals 20 metres in real life size. Later, by slowing down the video, so that it matches the speed of...

Williams Shipping has added a new vessel to its port-service fleet in the Solent, UK as demand rises in the maritime hub.

By the end of this year, our sea pilots are set to have undertaken a record number of pilotage acts. The total number is set to exceed 10,700, with almost 99% of the acts completed without delay.

The Port of Townsville, northern Australia’s largest multi-cargo port, is expanding its fleet of pilot boats to four.

The Port has awarded Hart Marine a $3 million contract to build a 17.3m ORC vessel that is due for delivery later in 2020. The new high-tech vessel will be slightly longer but have the same design features as the PV Osprey which was delivered by Hart Marine in late 2017.

Download Document here

This video shows an introduction on the Spiral-Test-Manoeuvre and describes the procedure how to steer through this manoeuvre and measure the data needed. The results will be displayed in a characteristic diagram allowing to identify stable and unstable conditions and related, detailed information, e.g. spiral loop width and height, rudder angle of neutral effect. Samples of stable and unstable ship behaviour demonstrations will be shown by Fast Time Simulation using the SAMMON Planning tool.