Tanker inbound to Aberdeen Harbour

It takes all sorts of roles to ensure safe and successful operations at Aberdeen Harbour. Meet Finn, a Marine Pilot, and find out why he enjoys working at the port...

In today's episode, we continued to take a look at the different aspects of Aberdeen Harbor, including the divers, the pilots, as well as others who work in the harbor. Pilots are required to cross between ships in the sea while both ships are still running, while divers continue to work under the sea on the pipeline. In addition, a charity event is happening on Aberdeen's main street. -- Aberdeen Harbor, on the North East coast of Scotland, is one of Britain's oldest businesses and one of...

It takes all sorts of roles to ensure safe and successful operations at Aberdeen Harbour. Meet Finn, a Marine Pilot, and find out why he enjoys working at the port.

A glimpse onboard cargo ship on how we do reportings upon entering VTS area and contacting of pilot upon arrival. On this video, the vessel is arriving in port of Bremen, Germany.
How we do it onboard? Watch the full video.

Up here in the north, we do things a little differently ...

"Mizar" is a 165 LOA containership, which follows a liner route between the caribbean and the US.
It has a fixed pitch propeller and a bow thruster, which makes it easier to handle. This maneuver consisted of basically just pulling her off the dock and then doing a 160 turn.

The need to hold such a webinar was felt from the interaction over several months of AIMPA members through its President, Capt. Gajanan Karanjikar, with Capt Simon Meyjes and Capt.Ravi Nijjer - both instrumental in the thorough upgrade of pilotage operations Safety management systems in parts of Australia. From these interactions, AIMPA has come to the firm conclusion that a thorough upgrade of maritime pilotage management systems in India is necessary. Holding a webinar would be a good...

In this movie the efficiency of two different pod operation strategies is compared: With azimuth propeller ships the Pods can be used in two ways to control the speed, e.g. for speed reduction: 1. by adjusting the engine orders, e.g. by reducing the RPMs to get lower speed - this means to drive the ship in the same conventional way as for twin screw vessels, 2. by turning both pods either in- or outward (TOE-IN or TOE-OUT) to reduce the forward thrust and therefore reducing the speed – the...

Impressive pictures from Colombia: MV Malcom arrived on June the 20th carrying the first wind generators for the "Guajira 1" project.