Video On the frontline: working at sea amid the COVID-19 crisis
published on 8 February 2021
When the world locked down, Australia’s marine pilots continued bringing ships safely into the nation’s ports to deliver the goods we depend on. Around 6,000 ships visit the ports of NSW each year and meeting them at sea to help them navigate into our ports and harbours are Port Authority’s marine pilots and cutter vessel crews. ••• Port Authority of New South Wales manages the navigation, security and operational safety needs of commercial shipping in Sydney Harbour, Port Botany,...
Article IMPA is hosting examples of best practice and protocols during Covid-19 times
by IMPA - International Maritime Pilots’ Association - published on 26 March 2020
Article How to Avoid Catching COVID19 whilst Piloting
by The United Kingdom Maritime Pilots' Association - published on 31 March 2020
Video Pilot boat "Perseus" from The Netherlands
published on 8 June 2023
Video Pilot disembarking M/V Sea Hope, San Francisco
published on 11 October 2021
Opinion A deliberately sabotaged Pilot Ladder
by Arie Palmers - published on 16 March 2022
Opinion Positioning of vessel at berth by using bridge wing gyro repeater
by Capt. Girish Chandra - published on 14 April 2020
Today I will discuss a very simple and useful practical trick often used by pilots.
When we have to berth a vessel with small clearances forward and aft (say 20 to 25 mtr fwd and aft) it is very essential that you are able to estimate your position. Now most of the time you have a berthing supervisor on jetty who will help you with position.
Video Operation of POD Ships - Discussion on Efficiency comparing Conventional and IN-OUT POD strategy
published on 8 June 2022
In this movie the efficiency of two different pod operation strategies is compared: With azimuth propeller ships the Pods can be used in two ways to control the speed, e.g. for speed reduction: 1. by adjusting the engine orders, e.g. by reducing the RPMs to get lower speed - this means to drive the ship in the same conventional way as for twin screw vessels, 2. by turning both pods either in- or outward (TOE-IN or TOE-OUT) to reduce the forward thrust and therefore reducing the speed – the...