Captured using DJI Mavic Air 2.
Captured using DJI Mavic Air 2.
Article TWO NEW METAL SHARK PILOT BOATS NOW SERVING PORT OF NEW ORLEANS
by Metal Shark Boats - published on 20 November 2019
Article Sixth High-Speed Launch for Delta Pilots
by Gladding-Hearn Shipbuilding - published on 27 November 2019
Article NEW PILOT BOAT DPC TOLKA ARRIVES IN DUBLIN PORT
by Marine-Pilots.com - published on 5 December 2019
Article U.S. largest pilot boat delivered to Texas. Stabilized by Humphree.
published on 19 March 2021
Breaux’s Bay Craft, Loreauville, La., delivered the new 90’x23’x12’4″ aluminum pilot boat Spindletop to the Sabine Pilots on March 6. The Sabine Pilots, Port Arthur, Texas, serve the Texas ports of Orange, Port Arthur and Beaumont. “This is the biggest pilot boat built in the U.S.,” said Roy Breaux, the shipyard’s owner. “There are bigger ones in other parts of the world, but this is the largest in the U.S.”
Video Storm Bert, Rough & calm, 'Murshid' Interceptor Pilot 60
published on 5 December 2024
Article Ninth Pilot 1820 - twelfth pilot boat for the demanding Norwegian market
published on 5 September 2022
Kewatec builds the twelfth pilot boat and the ninth Pilot 1820 boat for Buksér og Berging in Norway. The boat is of the same series as the previous Pilot 1820 boats that have been delivered during the last five years. The boats have a total length of 18.2 meters and are the flagships of Kewatec's pilot boat range.
Video Ex chief pilot of Bremerhaven harbor pilots on 400 meter ships (German with subtitles)
published on 1 February 2023
Matthias Meyer was head of the Bremerhaven port pilots, nautical expert and lecturer at maritime schools. In front of our camera, he voices what has long been a topic of discussion in shipping circles: that the 400-meter container ships have simply become too big for the narrow shipping channels of the Weser and Elbe. In his view, a serious accident is only a matter of time. We take a look at how the district is dealing with these giants and what politicians, BUND and shipowners have to say...