Article

Safe working with harbour cranes


by American Harbor & Docking Pilots Association - published on 24 August 2022 2392 -

This article was first published on 07.11.2019
Recently there have again been some accidents with cranes in the port. In view of the current situation, we are once again publishing an article from the American Harbor and Pilots Association on safe working with harbour cranes from 2019.

photo and article by American Harbor and Docking Pilots

For more safety when working with cranes in port

To minimize the risk of a vessel allision with a terminal gantry crane, the American Harbor and Docking Pilots Association recommends that all terminal operators with gantry cranes adopt the following Best Practices:
1) Prior to a vessel’s arrival or departure from a berth, gantry cranes should be positioned close together, near the amidships section of the vessel (avoiding the vessel’s bow and stern flair).
2) Idle gantry crane booms should be topped up over empty berths. If a boom cannot be topped up, tug dispatchers and pilots should be notified.
3) Gantry cranes should not be moved while a vessel is berthing. Moving a crane could put it into an unsafe position, and also disorients and distracts the docking pilot.
4) No personnel should be allowed aloft on a gantry crane during berthing or unberthing operations.

Risks that may occur during loading and unloading of the ship

Anytime a ship is maneuvered near a berth with gantry cranes, a risk of allision exists. If a ship contacts a dock at any attitude other than flat and parallel, portions of the vessel can extend over the dock. Should a gantry crane happen to be in the overshadow area, an allision resulting in significant loss is likely. The best way to manage and minimize this risk is to leave gantry cranes in identified “safe areas” on the craneways. These safe areas will vary from terminal to terminal, but will most often be the craneway areas adjacent to the ship’s flatbody between the spring line bollards.

Gantry cranes boomed down over empty berths risk contact with berthing or passing ships. Modern container vessels are generally too tall to pass safely underneath a lowered gantry boom. Also, new generation gantry booms extend more than 200 feet beyond the dock face, which in many cases is well into the federal navigation channel. In certain cases when a large vessel must pass very close to another on the berth, it may be necessary for cranes to stop work and boom up to permit safe passage.
Idle gantry crane booms should be topped up over empty berths. If operations require a boom down over an empty berth, the tug dispatchers and pilots should be notified of the likely duration and subsequent notification should be made when the boom is raised.

Gantry crane booms should not be moved down the craneway while a ship is berthing. First, any crane movement causes a loss of situational awareness regarding the ship’s motion relative to the berth. Second, the crane’s audible motion alarms interfere with pilot/tugboat communications. Either could cause the pilot to momentarily lose control of the vessel during the critical part of the mooring. If cranes must be moved to clear bollards for the linemen or for any other reason, they should not be moved during vessel approach until after the ship is resting against the dock fenders.

Personnel should not go aloft on a gantry crane during mooring operations Additionally, whenever personnel are aloft on gantry cranes that are boomed down over an empty berth, they must appreciate and evaluate the risks posed by passing vessels.

Copyright © 2018 American Harbor and Docking Pilots, All rights reserved

Join the conversation...

Login or register to write comments and join the discussion!
PA
Pinaki Adak India
on 30 April 2024, 06:35 UTC

Good Article . How I can download it
0

Read more...

Article Unofficial internal company timeline report of the ship accident in Busan 6 April 2020

by Marine-Pilots.com - published on 14 April 2020

"ONE - MSQ Accident News No. 31": ONE operated 13,900 TEU vessel “M/V Milano Bridge” has collided with gantry cranes and another vessel while approaching berth at PNC #8. This was the first berthing for phasing-in after Dry Dock.

0

Article Investigation report on the crane collision in Antwerp on 09.12.2019

by Marine-Pilots.com - published on 2 September 2020

Container ship APL MEXICO CITY broke off her mooring at Doel, Antwerp, in the afternoon Dec 9, drifted across harbor and contacted DP World pier crane. Crane collapsed and was totally destroyed.

0

Article Container vessel MSC MIA took down crane in Valencia, Spain

by Marine-Pilots.com - published on 13 September 2020

One of the biggest ships in the world, 23,000+ TEU container ship MSC MIA, reportedly contacted gantry crane while leaving container terminal at Valencia.

0

Article What is a Portable Pilot Unit (PPU)?

by TRENZ GmbH - published on 1 April 2024

1

Video SWATH vs. Mono Hull

published on 21 December 2019

Challenge between SWATH tender "DÖSE" and two 30m mono hull vessels in 2013.

0

Article Study: Correlation Evaluation of Pilots’ Situation Awareness in Bridge Simulations via Eye-Tracking Technology

published on 21 January 2022

Improvements to pilots’ situation awareness (SA) in maritime navigation are critical to reducing human errors, which have caused 75% to 96% of marine accidents over the last few years.

0

Video A Global Perspective | Maritime SheEO Conference 2021

published on 22 December 2021

What has the current experiences and developments in Maritime Pilotage Training been like? This session takes a global perspective at the conference. At the panel are: 🌊 John Barker, Senior Marine Pilot, Port of Auckland (New Zealand) 🌊 Captain Hanna Odengrund, Marine Pilot, Sweden Maritime Administration 🌊 Nurul Arrienne, Marine Pilot, Port of Tanjung, Malaysia 🌊 Fatouma Ali Ahmed, First Female Marine Pilot, Port of Djibouti 🌊 Reshma Nilofer, First Female Marine Pilot (India) 🌊...

0

Video Ship Pilot Training - Harbour Pilot Simulator

published on 24 September 2020

A maritime pilot, marine pilot, harbor pilot, port pilot, ship pilot, bar pilot, or simply pilot, is a mariner who maneuvers ships through dangerous or congested waters, such as harbors or river mouths. They are navigational experts possessing knowledge of the particular waterway such as its depth, currents, and hazards, as well as being experts in handling ships of all types and sizes. A Maritime pilot is an expert ship handler who is licensed or authorized by a recognized pilotage...

0