Three dedicated pilot cutters Patrol, Guide and our hybrid Leader are based at Gravesend. The six cutters used at Ramsgate are operated by a Estuary Services Limited, which is jointly owned by the PLA and Medway Ports Ltd.
Three dedicated pilot cutters Patrol, Guide and our hybrid Leader are based at Gravesend. The six cutters used at Ramsgate are operated by a Estuary Services Limited, which is jointly owned by the PLA and Medway Ports Ltd.
Video Pilot Boat "Petrel" (River Mersey)
published on 16 December 2021
Video Kittiwake Mersey Pilot
published on 22 December 2021
Video Pilot Transfer - New Zealand (Auckland) & Australia (Melbourne/Fremantle)
published on 21 October 2021
Article Gladding-Hearn Delivers New Launch to Virginia Pilots
by Marine-Pilots.com - published on 15 June 2020
The Virginia Pilot Association has taken delivery of a Chesapeake Class MK II launch from Gladding-Hearn Shipbuilding, its ninth pilot boat built by the Somerset, Mass., shipyard since 1983.
Since the Chesapeake Class pilot boat was introduced by the Somerset, Mass., shipyard in 2003, 22 boats have been delivered to 11 pilot associations throughout the United States.
Article ARANSAS PILOT III – Pilot Boat for Port Aransas, Texas
by Baird Maritime - published on 2 September 2022
Video The Pilot Boat At Carlingford - Irish Working Landscape Scenery Autumn
published on 16 October 2020
This is Paddy Rooney, Coxswain of the Carlingford Pilot Boat, on the lough which separates County Down and County Louth. The boat operates out of a small jetty at Greencastle - so called after it's Norman castle near the shore and not far from the town of Rostrevor with it's beautiful park and colourful streets. In this film Paddy and his crew rendezvoused with a cargo ship at Greenore Port - which is also a uniquely preserved 1800's railway village .
Article Selecting the right pilot boat
by Port Technology International - published on 21 July 2021
Video Pilotage in Kenya: a really dangerous job
published on 8 March 2021
Video Pilot Ladder on Ships- Correct rigging procedure 2020
published on 8 January 2021
Correct method of rigging pilot ladder explained.
As explained, a large number of reports related to the use of pilot ladders which are too long relative to the vessel’s draughts. As a result, the excessively long ladders require shortening up before being deployed for boarding pilots. In these cases, ship crew shortens the pilot ladders, using D-shackles to choke the side ropes at the required height along the ladder’s length. In this method, the D-shackle is first secured to a hard point...