Video

AIS Track APL MEXICO CITY - Accident in Antwerp on 09.12.2019


published on 10 September 2020 376 -

Found on YouTube. Created by "Marine-Pilots". Recorded on 2019-12-09.
Video AIS Track by Nolan Dragon - www.MarineTraffic.com

What had happened:
Container ship APL MEXICO CITY broke off her mooring at Doel, Antwerp, in the afternoon Dec 9, drifted across harbor and contacted DP World pier crane. Crane collapsed and was totally destroyed. No injures reported.

Cause of the accident (according to the report from FEBIMA):
"The allision of the mv APL MEXICO CITY with a gantry crane at the Port of Antwerp on 9 December 2019 stemmed from exceptional meteorological conditions and the not availability of tugboats to assist the vessel in remaining alongside as requested by the Master, that have lead to the breaking of seven mooring hawsers on the foreship of the vessel.

Subsequently, in order to gain control over the vessel and prevent damages the main engine of the ship was put ahead. All mooring hawsers at the stern of the vessel broke. The vessel subsequently sailed/drifted onto the gantry crane at the opposite side of the Deurganckdok thereby destroying it. The falling jib of the crane damaged the ship’s hull and propeller, rendering the vessel no longer seaworthy. In the further drifting/sailing onto the river Scheldt, a buoy and dolphin were damaged/destroyed."
Port of Antwerp, Belgium
What's your opinion on this?
Login or register to write comments and join the discussion!
Read more...

Video Belo Horizonte Bulk Carrier of AO Shipping arrives to Phu My Port - Baria Serece, Vietnam

published on 26 November 2021

Short video of the arrival of the bulk carrier BELO HORIZONTE. Shooting a shipping documentation and industrial photography for AO SHIPPING HaAMBURG in BARIA SERECE, PHU MY PORT in Vietnam. Activities and the unloading of Soya by cranes for a freight transport film. Director, dop/cameraman, drone operator, production: Peter Scheid. We thank the Baria Serece management in Phu My, Vietnam for their great support to realize this shooting. SHOWREEL INDUSTRY, VIETNAM FACTORY & MACHINES: REEL 1....

1

Article Unofficial internal company timeline report of the ship accident in Busan 6 April 2020

by Marine-Pilots.com - published on 14 April 2020

"ONE - MSQ Accident News No. 31": ONE operated 13,900 TEU vessel “M/V Milano Bridge” has collided with gantry cranes and another vessel while approaching berth at PNC #8. This was the first berthing for phasing-in after Dry Dock.

0

Video Operating an STS Gantry Crane (Joystick Cam): Loading a vessel in the Port of Antwerp

published on 17 November 2020

This cabinview video shows how to control a STS crane, there will follow a video were I show you all the buttons and joystick controls. Lot of people request these video's. This shows how to operate en ship to shore crane with a joystick camera! (DUAL CAM) Make sure you LIKE and SHARE this video is you want more video's like this! Hope you enjoy! Feel free to comment & subscribe! SUB LINK: https://www.youtube.com/channel/UCqoYj7ua7HwHvjjjyv3VyXA?sub_confirmation=1

0

Article Updated Marine Safety Information by U.S. Coast Guard

published on 6 November 2020

U.S. Coastgard has published an update of their Recommendation for Pilot Transfer Arrangements in latest Marine Safety Information Bulletins (MSIB).

"Recent deaths of maritime pilots while embarking commercial vessels highlight the risks of operating in an
unforgiving maritime environment. To ensure the safety of all personnel boarding a vessel at sea, the Coast
Guard reminds vessel owners and operators of the requirements contained in the Safety of Life at Sea (SOLAS) Chapter V, Regulation 23 and strongly recommends that owners and operators follow the recommendations within IMO Resolution A.1045(27) – Pilot Transfer Arrangements. "

0

Video AIS track of MILANO BRIDGE on 6 April 2020 (Busan port)

published on 8 April 2020

According to AIS past track data, the vessel was obviously too fast on 9 knots and also going down the wind (4-5 bft., take a look at the exhaust from the stack) when entered the inner harbour considering the size and displacement. That speed was approximate 3 ship lengths to the pier and there was the on pier wind after the turn. Why the ship entered the port so fast will be the subject of the investigations to be awaited. Knowing South Korea procedures there will be no just marine...

0

Article Mars report: Man overboard while rigging the pilot ladder

by Mars report by Nautical Institute - published on 2 December 2021

Going down the accommodation ladder with neither lifevest nor safety line must have been based on similar, past, successful operations, which may have never been challenged on board. This ‘slippage’ in safety is a pernicious and common phenomenon.

0

Article Miscommunication Leads to Tug Striking Shore Facility, Causes $1.47 Million Damage

published on 4 August 2021

A bulk carrier was departing port with a pilot on the bridge to assist with the undocking and manoeuvre downriver. The operation was also assisted by two conventionally propelled tugs, one forward and one aft.

0

Video Near miss: VALDIVIA dangerously approached beach in Vlissingen, NL

published on 28 May 2020

Container vessel ALDIVIA (IMO 9333395) was dangerously close to public beach at Vlissingen Netherlands, on May 21, while heading out to sea, en route from Antwerp to Helsinki Finland.
The cause of dangerous approach is unknown, but the ship wasn’t detained, she continued her voyage.

0

Video Pilotage

published on 26 July 2021

Pilot going onboard, using pilot ladder port side, 1,5 meters above the water.

0

Opinion Book review: Practical Ship Handling, Fourth Edition, by Malcolm C. Armstrong

by Kevin Vallance deep sea pilot and author - published on 5 June 2020

Some ship handlers today use electronic instruments from start to finish and these ships usually have powerful engines and thrusters and an almost unlimited number of personnel on the bridge.

0