Video Safehaven Marine Interceptor 60
published on 11 February 2025
Whilst filming for the Voyager T2000 I was asked by Frank from Safehaven Marine if I wanted to make a video about the brand new Pilot Interceptor 60. There was no way that I was going to miss this opportunity!
Sign up for my free newsletter: https://bit.ly/Yacht_Buoy_Newsletter
Voyager T2000 Yacht Tour: https://youtu.be/Z8m7mWNWGAs
Voyager T2000 sea trial: https://youtu.be/ihgjtrgV0O4
Video THIS is Safehaven Marine Interceptor 60 PILOT BOAT
published on 26 August 2025
While filming for the Voyager T2000, Frank from Safehaven Marine asked if I wanted to make a video about the brand new Pilot Interceptor 60. There was no way I was going to miss this opportunity!
If you would like to find out more about this boat or would like to get in touch with me about anything mentioned in this video: 👉🏻 https://linktr.ee/john_johnson 👈🏻
Voyager T2000 Yacht Tour: https://youtu.be/Z8m7mWNWGAs
Voyager T2000 sea trial: https://youtu.be/ihgjtrgV0O4
Article ARANSAS PILOT III – Pilot Boat for Port Aransas, Texas
by Baird Maritime - published on 2 September 2022
Article TRENT joins ABP Humber's fleet of pilot vessels
by ABP - Humber Estuary Services - published on 18 December 2023
Opinion Ships Pilot Elevator System
published on 27 July 2020
Video Pilot boat NES, North East Spit Pilots (UK)
published on 16 March 2022
Video Fantastic mobility in the smallest of spaces: Lynx
published on 10 October 2020
Video Pilot Ladder on Ships- Correct rigging procedure 2020
published on 8 January 2021
Correct method of rigging pilot ladder explained.
As explained, a large number of reports related to the use of pilot ladders which are too long relative to the vessel’s draughts. As a result, the excessively long ladders require shortening up before being deployed for boarding pilots. In these cases, ship crew shortens the pilot ladders, using D-shackles to choke the side ropes at the required height along the ladder’s length. In this method, the D-shackle is first secured to a hard point...