#Anchor #shipanchor #windlass Anchoring is one of the very frequent operations onboard ships. A number of variables and external factors influence the duration and location of an anchoring operation. While the type of seabed is of utmost importance during anchoring, soft muddy grounds or clay bottoms are best preferred. It should be taken care that the anchoring bottom is free of power lines, submarine cables, pipelines or rocks. Various methods on anchoring include consideration of...
Manoeuvring large ships at close quarters and on shallow water is one of the most difficult aspects of shiphandling because of the complex hydraulic interactions depending on the ships' speeds, on the water depth and on lateral restrictions like in canals. Training is conducted both on meeting and on overtaking ships in shallow waters. This video shows how overtaking in a canal can easily fail.
More information: http://www.portrevel.com/3781-shiphan...
In this movie the efficiency of two different pod operation strategies is compared: With azimuth propeller ships the Pods can be used in two ways to control the speed, e.g. for speed reduction: 1. by adjusting the engine orders, e.g. by reducing the RPMs to get lower speed - this means to drive the ship in the same conventional way as for twin screw vessels, 2. by turning both pods either in- or outward (TOE-IN or TOE-OUT) to reduce the forward thrust and therefore reducing the speed – the...