Article LYMAN-MORSE ANNOUNCES BALTIC WORKBOATS PARTNERSHIP
by Baltic Workboats AS - published on 15 December 2019
Since 1978 Lyman-Morse has built more than 110 vessels, ranging from aluminum workboats to high-end composite racing yachts and luxury power yachts. “Their experience with so many different building materials opens up a world of new possibilities for our vessels,” says Baltic Workboats’ CEO Margus Vanaselja.
Video Pilot 17 WP
by Baltic Workboats AS - published on 27 February 2020
Video Pilot Boats from port of Kobe, Japan
published on 3 June 2022
Video Marine pilot boat | valencia pilot
published on 6 April 2021
Video Pilot Boat "Tribulation". Cairns, Australia
published on 27 September 2021
Video Unberthing of a 23,000 gross tons tanker
published on 22 June 2020
The "Navig8 Axinite" is a 184 meter tanker. It is in loaded conditions. two tugs are used. The maneuver consists of backing out using 2 tugs and the ship´s engine, for about 2 and a half ship´s lenghts an then turning to port. After the turn, you can hear me talking with the captain about passing arrangements with an inbound vessel, (another tanker).
Video Failed overtaking of another ship in a canal - Port Revel Shiphandling
published on 10 May 2020
Manoeuvring large ships at close quarters and on shallow water is one of the most difficult aspects of shiphandling because of the complex hydraulic interactions depending on the ships' speeds, on the water depth and on lateral restrictions like in canals. Training is conducted both on meeting and on overtaking ships in shallow waters. This video shows how overtaking in a canal can easily fail.
More information: http://www.portrevel.com/3781-shiphan...